• 800.420.6088
  • Newsletter Sign Up
  • GSA Ships Worldwide

rollover to zoom

Gem Set 2 Mold by First Impressions Molds

  • Print
  • Wish List
  • Availability: In Stock
  • Product ID: 21465
  • QTY  
  • Description
  • Specifications
  • Manufacturer

Gem Set 2 Mold by First Impressions Molds.  65 cavities; dimensions vary from approximately 1/16 to 1/2 inch.  Molds are very soft and flexible and can easily go from as high as 450 degrees to the freezer without affecting the mold! Unlike other silicone molds ours are resistant to rips and tears! Best of all, they are odorless and nothing sticks to them!!

Hard Candy

 

How-to

 

After cooking your hard candy recipe, carefully pour the candy into a glass measuring cup with a spout, then slowly and carefully pour candy into the mold.

 

De-molding:

 

Let harden on the counter, and then pop the piece out by gently holding the mold with your thumbs on top and fingers on the bottom of the mold and flexing it out and up.

 


 

 

Tips

 

      If the candy becomes too thick for pouring you can put it in the microwave for about 5 to 7seconds to get thin again. If the candy gets too hard, you have to start over again!

 

      It is best not to attempt making hard candy on a really humid day. You will end up with candy that feels sticky to the touch when it hardens.

 

      You should only flavor your candy with flavoring oils; they are sold in most cake decorating shops, or online.

 

      You can only color candy with liquid color, like the kind sold in the grocery store (food coloring).

 

      Follow the recipe directions for hard candy exactly.

 

      To store: wrap individual pieces to prevent them from sticking together.

  


 

Recipe

Ingredients:
2 cups granulated sugar
2/3 cup light corn syrup
3/4 cup water
1 tsp flavoring oil 
liquid food coloring (as desired)
Candy thermometer

Directions:
Have all ingredients and tools assembled and within easy reach of the stove. The use of metal spoons and measuring utensils is recommended.   If using molds, you may also want to spray a piece of aluminum foil with cooking spray. If after pouring the candy into the molds you have excess candy, you can pour it onto the foil to break into small bite size pieces later.

In a 2-quart saucepan, mix together sugar, corn syrup and water.   Stir over medium heat until sugar dissolves.  Insert candy thermometer if using, making certain it does not touch the bottom of the pan.  Bring mixture to a boil without stirring, washing down any sugar crystals that form on the sides of the pan with a wet pastry brush. 

Remove from heat precisely at 300 degrees F (temperature will continue rising), or until drops of syrup form hard, brittle threads in cold water. After boiling action has ceased, add several drops of food color (if desired) and flavor. Stir to combine. USE CAUTION WHEN ADDING FLAVORING TO AVOID RISING STEAM.

Pour candy into molds.  Do not refrigerate.